Thursday, September 25, 2014

Tando Spotlight No. 3



Hello everyone!

Welcome back to Our Creative Corner....Laura here with the final Spotlight of the month!
Tando Creative is our generous sponsor this month and today I will be showing you something I have made with one of their gorgeous chipboard sets....


I chose to use the Heart Cog Pendant


And I decided to make my first ever chunky ATC !


   I made the Chunky ATC from balsa wood and smothered it in texture paste


I smoothed out some areas and patted others with the palette knife to get a rough texture effect

Then when it was dry I painted it with Nougat Fresco paint and when that was dry I blended some Walnut Stain DI all over it.

The Tando heart was covered in text paper and inked with Antique Linen DI and then had Decoart one step crackle applied. This was then inked over with Walnut Stain DI to enhance the crackle effect.


The cogs were painted with Old Gold Fresco Paint then covered with crackle glaze. When this was dry I added a few layers of Decoart Media Antiquing cream in Patina Green and English Red Oxide. When dry I dabbed the excess away with a baby wipe. I then dry brushed a mix of Bora Bora and Guacamole Fresco paint over the top.



     The tiny flowers are die cuts painted with Guacamole Fresco paint and edged with Vintage Photo DI. Decoart one step crackle was applied and a bronze brad was added to the centers


A strip of card was inked with Evergreen Bough and Vintage Photo Distress inks and a chit chat sticker was added. A small brass key was attached to the card.


I added various other embellishments too


 Around the Chunky ATC I added strips of tissue tape, some script stamp and butterfly stamps




I stamped the butterfly onto card, inked with Evergreen Bough and Vintage Photo DI's and then cut it out. I stuck the butterfly onto one of the cogs.


Hope you like it!



      If you like Tando items then why not enter our current challenge - one lucky entrant will receive some Tando goodies!

And of course you could always be the winner of the challenge and be invited to be our Top Talent. You could be basking in the spotlight right here at Our Creative Corner!

    All you have to do is enter the Autumnal Inspiration Challenge hosted by Claudia - there are still a few more days left - come and dive right in!

 I will be back here on the 1st October with a brand new challenge for you! Don't forget to come and find out what it is!



Happy Crafting!

Laura x

            

Monday, September 22, 2014

Homemade Flowers and Hand Dyed Ribbon Top Talent




Welcome back to another Top Talent spotlight at Our Creative Corner!

This month we are shining the spotlight on the winner of the 'Homemade Flowers and Hand Dyed Ribbon' Challenge that was hosted by Astrid!

Our Creative Corner is so pleased to be welcoming Julie from Juliz Design Post

  Julie is a second time winner here at Our Creative Corner. She won previously for her gorgeous butterfly canvas in February! 
When someone wins at the OCC three times they are awarded a Gold Winners Badge! 
I wonder if Julie will be the first to do it? (No pressure Julie!)


Before we show you Julie's stunning creation,  let's just spend some time finding out a little bit more about her..... 




1. Is there something you wish you were better at?
 

I envy people that can draw and paint a picture. My paintings and drawings still look the same as when I was at Primary School.


2. If you had a time machine, what historical figure would you love to see in 21st century life?
 

There are several people I would love to meet past and present but one of the historical figures that has always stood out for me since I was a child is Joan of Arc.


3. Whats the most unusual thing you've ever eaten?
 

This I had to think about as I am not very adventurous at trying new foods. But probably a frogs leg which a chef talked me into trying a little bit of....never again !

4. What supply wouldn't you do without when it comes to stamping?
 

I couldn't do without my go to background stamps of crackles, leaves and script they are always lying on my desk should I need to add an accent onto something.


5. Are you a day-time or night-time crafter?
 

I tend to craft in the afternoon but have been known to do a night shift crafting. Sometimes I wake up in the middle of the night with an idea and can't get back to sleep as I keep thinking about it. So I give up trying to sleep and get up and craft.


6. Do you work on more than one piece at a time?
 

Occasionally if it is a large project, otherwise I tend to finish what I have started before moving on to the next thing.


7. If you had to move to a state or country besides the one you currently live in, where would you move and why?
 

Majorca is a place where my husband and I have lots of wonderful memories and for the warmer climate. I also have a great love for York in England, it is so steeped in History I never tire of this place.




Now let's see what Julie made for her second time in the Our Creative Corner Spotlight!!!!




How amazing is this?






This is so beautiful Julie! As always your work is so full of detail! - It is always such joy to see your work and it has been such an honour to feature you today at Our Creative Corner.
 
Thank you for being such a wonderful Top Talent in the spotlight!
 
If you want to see more photos and details of this wonderful creation and find out how it was made, then please go along to Julie's blog Juliz Design Post and say "Hello" - I am sure she would love to see you there!




Would you like to see your work here in the 'Our Creative Corner' Spotlight?
You could be here as our 'Top Talent' with the spotlight shining on something you have created! 
All you have to do is enter Claudia's Autumnal Image Inspiration challenge.

You could also be one of our Top 3 and there is even the chance to be the winner of a super prize kindly donated by Tando Creative... 
There is one more week of the Autumnal Image Inspiration challenge left, so why not have fun creating!

Happy Crafting! 
Laura xxx 



Thursday, September 18, 2014

Sponsor Spotlight No.2 - Tando Creative

Servus! Claudia here bringing to you another spotlight inspiration showcasing another of the products of this month's challenge sponsor


http://tando-creative.blogspot.co.at/


If you haven't already seen Julia's fantastic project, I highly recommend you scroll down (or simply click the link) to find out what she made of Tando's advent calender (who would have guessed it was so versatile?).

I chose Tando Creative's  "3 Clocks in 1" for my spotlight creation:


and altered a 3 Euro clock from one of those 1 Euro shops to make it look like this:




I had a massive play with a lot of the new DecoArt media stuff (you'll find a list of all the materials I used at the bottom of this post) and accidentally "invented" a cool technique to create a kind of "splintered enamel" effect.


But lets start with how my clock looked "before":


it looked quite "nice", but was too small, so I was very happy to find that the largest of Tando's "3 Clocks in 1" fit perfectly as a kind of outer frame. I only had to build some framework to attach the clock face. So I used some small pieces of wood (left from a very small canvas) and glued six of these to the back of my small clock - using DecoArt matte Decou-Page.

Then I covered my clock and the Tando piece with a layer of DecoArt's black Gesso from the new media line (don't worry if there are any brushstrokes visible - these will be covered later). 




Once this had dried, I gave it all a coat of DecoArt media "Matte Medium" to seal my surface for further treatment. 



The Matte Medium spreads really easily and goes a long way! It is also fast drying, so I didn't have to wait or speed up the process with the heat tool (which I wouldn't recommend anyway as this can cause nasty bubbles when acrylic colours or medium are getting too hot). 

I prepared some colour washes for the next step, using DecoArt media fluid acrylics Transparent Yellow Iron Oxide, Raw Umber, Titan Buff and Quinacridone Violett.



 Then I got out the new DecoArt media white Crackle Paint and started painting only a small area of my clock at one time - as the crackle paint dries rather quickly, painting the whole clock would leave you with dried paint - which will prevent my technique from working! 


So here's what you have to do: 

- paint a rather small area with white crackle paint
- take a fine tip brush and load it with your washes (one at a time) and sprinkle these onto the still wet crackle paint
- vary the size of the sprinkles to get large puddles of wet paint as well as smaller stains that will dry quicker
- leave the large puddles of watery paint as they are and repeat all the steps until you have covered the whole clock


Allow your sprinkled on colours to mix and create random colour effects. Don't dab any of the large puddles dry until the crackle paint has done its magic!!!!! 

Once the crackle paint has dried completely, take a piece of kitchen roll and dab off the wet paint from the larger stains - this will remove the  diluted acrylic colours AND the crackle paint and reveal the black colour from underneath! 




This way you get the look of a splintered enamel surface:




You can also see how the black Gesso underneath the white crackle paint makes the cracks more visible! 

Next apply some DecoArt Traditions "Transparent Yellow Iron Oxide" and "Carbon Black" onto a palette and dab the colours onto your clock's edges using your fingertip:






This will create an uneven edge that looks a bit like splintered enamel too. 



I did this with both - my clock and the Tando Clock frame - first applying the lighter colour and then the darker - trying not to work too evenly. 

After all had dried I fixed the clock frame to the clock face with some more Decou-Page (using cloths pins to keep everything in place until dry):



Done! 



I hope you like my "splintered enamel" technique!!!

I add some more close ups so you can see the variety of effects I got on the crackle paint:












Materials used:

- Tando Creative "3 Clocks in 1"
- a cheap wall clock from the Euro/Dollar/Pound Shop
- six pieces of wood (left overs)
- DecoArt media fluid acrylics:  Transparent Yellow Iron Oxide, Raw Umber, Titan Buff and Quinacridone Violett
- DecoArt media black Gesso
- DecoArt media white Crackle Paint
- DecoArt matte Decou-Page
- DecoArt media Matte Medium
- DecoArt Traditions: Transparent Yellow Iron Oxide, Carbon Black
- brushes, palette, kitchen roll, water


***

As it is only a few days past mid-month, I would like to remind you of my actual "Autumnal Image Inspiration" challenge over here at Our Creative Corner, which is still open until the 28th of the month! I would be sooo happy to see you join in!!! 

Hugs and happy crafting,

Claudia xxx



Thursday, September 11, 2014

The Sacred Book of Runes



Servus and welcome back to Our Creative Corner, dear creative friends!

Claudia here and today I have the (very) great pleasure to introduce to you this month's Guest Designer - Candice aka Tincan Crafter!

Yay! I sooo admire and love what she does - ever since I discovered her awesome blog - Tincan Handmade Craft Deli - and her most imaginative and enchanting art she shares on it. She also likes to share the how-to and I can tell you that visiting her blog never sees me leave without the urge to create something (at least half) as stunning, captivating and clever as she just showed in her latest post! ;)

So you can imagine how happy (and proud) I was when I found that she said "yes" to the invitation for this guest designers spot!

Thank you for being with us today, Candice! Me and the OCC team are so happy to have you with us today! xxx

But now I leave the stage for our oh so special guest - please, welcome Candice, the Tincan Crafter! Applause, applause, applause (*doing the Kermit the frog wave about)!!!


***

I have been holding onto an almost unbearable secret for a few months…..

A couple of months ago I was invited to be a Guest Designer for “Our Creative Corner” for September. I was completely floored and excited and so very honoured to have been asked to participate in this way. 

I was challenged to take inspiration from this picture collage as featured at the start of the month. Right off the bat, the knotty tree bark and the vine just jumped right out at me.

After crash-testing a bunch of different crafty ideas, and because I am currently fascinated with all things Viking-like, 
I decided to create “The Sacred book of Runes” as my feature project. 

 

I bet you are thinking – how in Odin’s name did you find a piece of bark big enough to cover a whole book?  I didn’t!! I have an insatiable need to experiment – during one of those experiments I discovered a pretty cool way to create a bark like texture with texturising medium. 

So I am going to share my technique with you today as well as a few other crafty tutorials on how to make the burned Rune Scroll, Carved tooth Charm, Faux Suede straps and Precious Stones that I embellished the book with.

YOU NEED:
  • A regular book or journal or whatever you want to turn into an old book of mystical charm.
  • Bulking material to create the layered uneven bark bulk – In the past I have used ripped pieces of chipboard, bunched up masking tape, old linoleum flooring that I cut and distressed, basically I use whatever I have on hand, I am a little too into recycling junk into craft materials, so a lot of my ideas of how to create a specific texture really come from me trying to to recycle my house junk.  For this tutorial I used ripped pieces of chipboard.
  • Strong glue
  • Paint or Universal stain in brown and black.
  • Texture paste.  I am a big fan of Dala texture paste (South African Brand)and buy that by the bucket loads but I am aware that Claudine Helmuth and Ranger also have their own brands of texture paste and I reckon those do exactly the same job.  
  • A spreader like a palette knife or butter knife in a pinch, anything with a relatively flat surface will suffice
  • A skewer stick or toothpick or any pointy, sharp, needle-y type thing.
  • Heat gun if you want to expedite the process.
METHOD:
  • Get your book out. paint it brown if you want to.
SAM_0255SAM_0256
  • Decide how much overhang you want off of the book that you are altering.  I didn't bother with too much overhang for this book. If you want a little overhang, cut a piece of bookboard or chipboard, that will serve the dimensions you have decided on. Glue this on the existing cover.  A tip I should add here is that your book will open better if you have a bit overhanging over the edge of the spine, and you make the crease line where the book folds out to open.
  • Cut another piece of book-board slightly bigger than that and rip it into strips.  They don't need to be uniform. In fact if the edges are rough and and ripped and shredded – all the better, it will give you all the right irregularities of ordinary flaking bark.
  • Start by gluing the strips down, some slightly overlapping, some short pieces, some long pieces some tapered pieces.  You control the look and thickness  of the bark bulk by adjusting your tear and layering pattern.  Alternatively, you could stick bunchy strips of masking tape in a way that it creates bumps and ridges.
DSC_0132SAM_0266
  • Scoop out some texture paste into a mixing container. You could colour that paste now with the Brown paint or Stain.




  • Go ahead and spread that lovely chocolatey mess like icing/frosting on the book that you have covered in bark bulk. Use the palette knife to trowel it in all the little cracks between the glued pieces.  Don’t worry about getting it smooth.  Just plonk it down and make sure you have a good layer of coverage. Using the Palette Knife gently tap the texture paste icing in an up and down motion to create tiny peaks. Take a skewer and etch out random vertical lines. Let this dry thoroughly.  You could speed things up with a heat gun that blows hot air not the one that is just heat.

SAM_0262SAM_0264
  • You can now take a makeup sponge or a sponge applicator and pick up some darker brown or black paint and burnish over the raised edges.  This will create more dimension and make this look like real bark.



YOU NEED:
  • Bathroom sealing Silicone
  • Cornstarch or Tiling Grout if you really want get cute,
METHOD:

Measure out a liberal amount of grout or cornstarch. Squeeze out some silicone.

DSC_0133DSC_0134
  • Mix and knead together until you get a pliable but rubbery texture (like crazy clay but denser and more rubbery). Manipulate it into little rock forms.
  • Leave it to dry and harden, it will keep a rubbery texture though so don’t expect it to be very hard
Paint or dye it with alcohol inks or paint. You can also dust on Perfect Pearls for glimmer.  For added oomph you can give it blast of clear lacquer spray paint to make it all shiny.







YOU NEED:
  • Thin cardboard
  • Distress Ink
  • Black Permanent Pen or Calligaphy Pen with India Ink
  • Soldering Iron or Incense Sticks
METHOD:
  • Stain paper with Distress Ink (you use whichever colour you feel your scroll should be.
  • Write the Runic Alphabet on the stained paper or make up symbols that look Rune-like.
  • Distress around the edges with Black Soot Distress Ink.
  • To make singe-holes – hold a soldering iron to paper until it starts to singe and burn, if you don't have a soldering iron, a lit incense stick will work fine as well.
  • Roll up into a scroll and keep in place with some wire


YOU NEED:
  • Fun foam cut into strips
  • Paint or stain
  • Glue
  • Cotton Flock for suede look
  • ModPodge or Glaze Coat for tanned and polished leather look
METHOD
  • Soak the foam in paint or stain solution or just paint it over the top.  Leave to dry completely. Paint a layer of glue over the top.
DSC_0044DSC_0045
  • Sprinkle on cotton flock.  Dry completely.
DSC_0046DSC_0047
  • You can adjust the colour by making a light misting spray and misting the strips.
DSC_0048DSC_0052






 YOU NEED:
  • plastic bead that resembles a tooth or horn
  • Alcohol Ink
  • Distress Paint
  • Sandpaper or a file
  • Permanent Marker
  • Linocutting tools or engraving tool
DSC_0143
METHOD:
  • Lightly sand the the high sheen plastic tooth, rub harder in some places this will create a toothy surface for the ink and paint to stick too
  • Write your symbols on the bead to give you some kind of guide on where to engrave,
  • Use the lino-cutter to scratch or engrave the design into the bead.
  • You can darken the engraving with the thin tip of the marker to give it more contrast
  • Swipe alcohol ink over the whole bead and rub off some of it so that it creates a worn distressed effect.
  • To make the brown wood-like tooth – sand the bead, then apply walnut stain paint all over the bead. Now you can do steps 2 and 3 to finish the look.
  • If you want it to be more polished – give it a blast of clear lacquer spray paint.


And that brings me to the end. I hope you will give it a shot.  Thanks again for asking me to be a part of such a fun challenge for such a fun craft blog.

Hugs
Tincan (aka Candice)  


***

Now, did I promise too much? Thank you for all these awesome tutorials and that wonderful load of inspiration, Candice! Mwah! XXX

***

Dear players and readers, don't forget to join in our actual challenge with my "Autumnal Image Inspiration" - it is open until Sept. 28th, 11:55 pm and I would love to see you play along with me!

Also don't forget to stay tuned for some wonderful Sponsor Spotlight Inspiration throughout the month! Tando Creative are our generous sponsor this time - so there will be a lot of Tando goodness to see! Yay!

Hugs and happy crafting,

Claudia
xxx